DT-V20L3G 20” Multi-Format LCD Monitor |
Model: DTV20L3G
-
3G and Dual Link equipped SMPTE 424M/425M/372M
-
JVC 10-bit video processing
-
High operating viewing angle
-
Waveform/Vector scope
-
LTC & VITC support
-
Gamma selection
-
Various marker function
-
Audio level meter up to 12ch
|
Product Code:DTV20L3G
|
|
DT-V20L3G Features |
- 1680 x 1050 resolution
- Wide viewing angle 178°/178° with IPS panel
- 3G/dual link equipped
- Circuits that deliver low latency of less than one frame
- Waveform monitoring with over level function
- Vector scope with selectable size and position
- Advanced audio level meter up to 12 channels
- Exclusive JVC image processing technology
- LTC & VITC support
- Selectable gamma preset modes
|
- Wide selection of video production functions
- Easy-to-operate front panel controls
- Front LED dimmer function
- Source ID input by ASCII code (Red/Green/White colour linked with tally)
- Information position selectable
- 1:1 mode
- Gold-plated HD/SD SDI terminals with embedded audio
- DVI-D with HDCP terminal
- RS-232C, RS-485 remote
- Audio speaker built-in
- Rugged, adjustable stand provided
|
DT-V20L3G Highlights |
- 3G/Dual Link Equipped
1080p uncompressed digital video data transmitted at a maximum rate of 60 frames per second at 3 GB/second can be input with one HD SDI Input. Dual Link is available through two HD SDI inputs.
- IPS (In-Plane-Switching) LCD Panel
IPS panels with wide viewing angles and low chromatic variation ensure minimal colour change from different viewing positions.
- Gamma Preset Mode
JVC offers various pre-set gamma modes (2.2, 2.35, 2.45, 2.6) to meet your application needs.
- Advanced Audio Level Meter
The DT V20L 3G channel number is displayed in each level bar. And, you can check the status of the audio signal at a glance for Reference Level/Over Level 0 dB, three set levels, and peak hold function.
|
- Vector Scope*
DTV20L 3G's High-quality vector scope allows simple checking of hue and saturation of digital video signals. Hue and saturation of colour signal are detected and displayed as a vector with resolution of 254 x 254.Compatible with video, component, SDI (SD/HD), DVI (except PC signals) input signals, and offers a double-size display** option and selection of display position or translucence functions.
- Waveform*
DT V20L3G detects video, component (except RGB), SDI, DVI (except PC) brightness signals and displays them with resolution of 360 x 254 for SD signals or resolution of 480 x 254 for HD signals. Besides, it is alsopossible to perform checks at the colour signal level of each colour per screen for R/G/B, Y/PB/PR, Y/CB/CR. Over-level function enables peak brightness to be checked at a glance. The display allows a double-size display** option, and selection of display position or translucence functions.
|
|
DT-V20L3G Specifications |
Model |
|
DT-V20L 3G |
Type |
|
Multi format LCD monitor |
Screen Size |
|
Type 20 wide format |
Aspect Ratio |
|
16:10 |
LCD Panel |
|
20" wide,active matrix TFT |
Effective Screen Size (W x H) |
|
433.4 x 270.9 mm (17-1/8" x 10-3/4") |
Pixels |
|
1680 x 1050 |
Display Colors |
|
16.77 million |
Viewing Angle |
Horizontal |
178° |
|
Vertical |
178° |
Brightness |
|
470 cd/m2 |
Contrast Ratio |
|
700: 1 |
Response Time (G to G) |
|
6 ms (TYP) |
Horizontal/Vertical |
Horizontal |
31.469 kHz to 75.000 kHz |
Frequency (PC signals) |
Vertical |
48 Hz - 65 Hz |
|
|
Depending on the signal within the range of these frequencies, some signals may not be displayable in which case, "Out of range " is shown. |
Applicable Standard
|
|
3G SDI (Ready) : SMPTE424M/SMPTE425M |
|
DUAL LINK HD SDI: SMPTE372M |
|
HD SDI: BTA S-004C, SMPTE292M |
|
SD SDI: ITU-R BT.656: 525/625, SMPTE259M: 525 |
|
EMBEDDED AUDIO: SMPTE299M, SMPTE272M |
Audio Output |
|
Internal speaker: 1.0 W + 1.0 W |
Operating Conditions |
Operating temperature |
5°C to 35°C (41°F to 95°F) |
|
Operating humidity |
20% to 80% (non condensing) |
|
Storage temperature |
-20°C to 60°C |
Power Requirements |
|
AC 120/220-240 V, 50/60 Hz |
Rated Current |
|
1.00 A (AC 120 V) / 0.60 A (AC 220 – 240 V) |
Dimensions (WxHxD) |
With desktop stand |
477 x 394.6 x 243 mm (18-7/8" x 15-5/8" x 9-5/8") |
(excluding protrusions) |
Without stand |
477 x 354 x 99 mm (18-7/8" x 14" x 4") |
Weight |
Including stand |
10.6 kg (23.3 lbs.) |
|
Excluding stand |
7.7 kg (16.9 lbs.) |
Provided Accessories |
|
AC power cord, power cord holder x 1, |
|
|
screw x 2 ( for power cord holder) |
INPUT/OUTPUT TERMINALS |
Video |
VIDEO (INPUT 1) |
Input/output of composite signal: |
|
2 line, BNC connector x 4, 1 V(p-p), 75 |
VIDEO (INPUT 2) |
* The input (IN) and output (OUT) terminals are bridgeconnected (auto termination). |
DVI-D (HDCP) |
DVI-D signal input (compatible with HDCP): |
|
DVI-D connector x 1 (compatible with DDC2B) |
COMPO./RGB |
Input/output of analog component signal/analog RGB signal: |
(GY, B/PB/B-Y, R/PR/R-Y) |
1 line, BNC connector x 6 |
|
G/Y: 1 V(p-p), 75 (including sync signal) |
|
B/PB/B-Y, R/PR/R-Y: 0.7 V(p-p), 75 |
|
* The input (IN) and output (OUT) terminals are bridgeconnected (auto termination) |
EXT.SYNC (CS) |
Input/output of composite sync signal: 1 line, BNC connector x 2, |
|
0.3 V(p-p) – 4 V(p-p), 75 (tri-level sync, negative polarity sync (bi-level), and BB) (including no video signal) |
|
* The input (IN) and output (OUT) terminals are bridgeconnected (auto termination) |
Audio |
E. AUDIO HD/SD SDI (IN 1) |
Digital signal input (compatible with EMBEDDED AUDIO/ |
E. AUDIO HD/SD SDI (IN 2) |
DUAL LINK signals): auto detection, 2 line, BNC connector x 2 |
E. AUDIO HD/SD SDI |
Digital signal output (compatible with EMBEDDED AUDIO signals): |
(SWITCHED OUT) |
1 line switched out, BNC connector x 1 |
AUDIO ASSIGN (IN1) |
Analog audio signal input: |
AUDIO ASSIGN (IN2) |
2 line, RCA connector x 4, 500 mV (rms), high impedance |
AUDIO ASSIGN (MONITOR OUT) |
Analog audio signal output: 1 line, RCA connector x 2, 500 mV (rms) |
External Control |
REMOTE (MAKE/TRIGGER) |
RJ-45 x1 (8-pin) |
REMOTE (RS-485) |
RJ-45 x2 (IN/OUT) (8-pin) |
REMOTE (RS-232C) |
D-sub(9-pin) x1 |
|
|
|