Evertz CP1601a Quartz  панель управления 16x1
The CP-1600A is intended to be a cost effective panel for small systems. As with all Quartz panels, the buttons are individually programmable for functions such as source selection, destination selection, breakaways and locks, etc. The CP-1600A is typically used to control 16 sources and 16 destinations with four levels of breakaway and is neatly packaged in just 1RU of rack space. A version is also available as a local panel which fits onto the front of most standard Quartz 1RU router frames. The CP-1600A supports up to four levels of breakaway.

The CP-1601A is a simple 1RU panel intended as an entry level low cost panel for small systems. As with all Quartz panels the buttons are individually programmable for functions such as source selection, destination selection, breakaways and locks, etc. This ensures maximum flexibility of the system. The most common use is as a single destination 16 button-per-source input panel.


Features
Fully programmable buttons to operate in a variety of modes, e.g. as 16x16 XY
Button-per-source selection of 16 inputs
Lock or Enable button to protect against unauthorized or accidental selection
Buttons can be programmed for breakaways
Push buttons with a quality action and red LED
Slide-in designation strip for name legending
Camera joystick override on any eight inputs, with momentary or latching action
Additional CP-1600A Features
XY panel, programmable to control from one through 16 destinations with breakaway
Single destination mode with breakaways
Dual seven segment display shows current destination number
Four levels of breakaway available
Lock facility protects against accidental or unauthorized selections
Chop mode for continuous toggle between any two sources

Specifications
Control
Q-link to Remote Panels75? video cable 500m max. length
Serial RS232/422 (Optional)D9 female
Parallel (Joystick Override)D9 male, TTL levels
Power
Supply90-132V, 180-264V, 50/60Hz
Consumption10 Watts
Physical
Height1RU, 44mm (1.75" nominal)
Width19" rack mount
Depth130mm (5" nominal)
Weight1.50kg (3.3lb)
Operating Temperature0-40°C

Ordering Information
Notes• These part numbers refer to the hardware only. Precise operation is determined by the configuration of the control panel.
CP-1600ARemote Mini XY Panel, BPS
CP-1600A-LPLocal Mini XY Panel, BPS. Supplied for use as a front panel on most 1RU frames
CP-1601ARemote Panel, multi-mode 16 BPS and Lock
CP-1601A-LPLocal Passive Panel, 16 BPS and Lock. Supplied for use as a front panel on Q1601, Q1602 or with PI-1604/08
CP-1601A-PRemote Passive Panel, 16 BPS and Lock. (Has integral rack ears for 19" rack mounting, connects via D25 cable. Generally used with the Q1601 and PI-1604/08
Ordering Options
+S7Serial Interface & Protocol
Accessories
CI-0003RS232/422 Interface (Enables the serial port and is fitted inside the panel)

Задать вопрос о товаре  - отвечаем в течении нескольких часов.